a morning with maltsters, part three: on the tour, some archaeological thoughts

We left the meeting room of the Highland Park Distillery and started our tour of the maltings. I'd forgotten my camera, however it gave me the opportunity to make notes and think a bit about the archaeological evidence for making malt.

This was not my first tour of a malting facility. Years ago, when I started my post graduate research into the archaeology of malt, ale and beer I contacted Thomas Fawcett and Sons, Maltsters, in Castleford, West Yorkshire and asked if they could show us round. They were very helpful and friendly. Soon we had been given a personally guided tour of the maltings by James Fawcett himself. Fawcett's make malt for the brewing industry using traditional floor malting techniques as well as having modern Germinating Kilning Vessels. There's a short film on their website where the ancient craft of floor malting can be seen. We'd wanted to see how an industrial maltings worked, having already visited an 18th Century grain barn at the Corrigall Farm Museum, Orkney, with a threshing floor, malting floor and grain drying kiln. Making malt is the same process, whether you are in a grain barn on a farm or at an industrial floor malting. The only difference is the scale of the task.

The tour of the Highland Park Maltings began with the steep tanks. Barley is steeped in water with regular air rests. Air is bubbled through. Steep tanks vary in size, obviously, but the basic principle is to get the barley wet enough and aerated sufficiently to trigger the germination process.

the steep tank, barley in bubbling water, with regular air rests
source MAGB

Steep tanks emulate a traditional and probably ancient technique. Maltsters in history and prehistory would have put their harvested grain into a porous bag and then left it in a shallow bubbling stream for a few days. This practice would, of course, leave absolutely no archaeological evidence. I was first told about it by an Orcadian farmer, maltster, brewer and crofter, Harry Flett, who was the custodian of the Corrigall Farm Museum.

a babbling brook, plenty of water and oxygen here
source wikipedia images

In Britain, people began to grow barley and wheat around six thousand years ago. This was the neolithic era, when hunter gatherers settled down and grew crops. What were they doing with the grain? How were they processing it? The consensus of opinion in academic archaeological literature and belief is that, since the earliest neolithic, they were grinding it into flour to make bread. Perhaps they were boiling it up to make porridge or gruel. The possibility of making malt has not been taken seriously. Many archaeologists, including professors, have shouted at me when I've made this suggestion at conferences. They don't like the idea of making malt in the neolithic.

I've written about some aspects of my research into neolithic grain processing, grain barns and the "first farmers" in an earlier blog. Many of the neolithic rectangular timber buildings in Britain and Ireland were situated beside or close to streams and rivers. Carbonised barley grains with missing embryos have been discovered at a number of these ancient sites. I think that they are good candidates for grain barns and malt houses five thousand years ago.

The steeped grain is transferred to the malting, or germination, floor. This is where it begins to grow visibly. Conditions have to be right. It's too hot in the summer months for floor malting, however, with the modern GKV systems it's now possible to make malt every day of the year. At an industrial floor maltings there are large amounts of grain to be carefully transferred from one place to another. We were introduced to the malt chariot.

steeped grain goes into the chariot
source here

from steep tank to malting floor
source here

According to Distillery Manager Marie Stanton, a malt chariot is a tricky thing to learn how to drive. The maltsters are experts at it, of course. An industrial floor maltings has to deal with large amounts of malt which is couched, then spread out on the floor. The chariot at Highland Park was in use regularly for this purpose. Ambient temperature and weather conditions dictate the depth of the grain bed.

There were several wooden malt shovels, or shiels, leaning up against the wall. They are used to turn the malt. It's a long job and in an industrial maltings like this, team work is crucial. It takes hard work and skill to turn tons of malt on the floor using one of these. On the tour we were told that some maltsters at the Highland Park were ambidextrous, able to turn malt to the right and to the left with ease. Others preferred to just work one way, which seems to be how the owner of this well worn malt shovel worked.

A 19th Century malt shovel, well worn from use
source here

As well as wooden malt shovels, fish tail rakes are used. These make the job so much easier, follow the link below the photo to find out why. Raking the malt is not just a skill, it's an art.

A medieval style custom made malt rake, with fish tails, used by Riverbend Malt House

How did neolithic and bronze age maltsters turn their malt? What did they use? They had no metal rakes. Wooden tools rarely survive in the archaeological record. I've sometimes thought that an animal's shoulder blade might have been a suitable tool. A scapula is a sturdy thing, it has the shape of a shovel and could be used for many tasks that the "first farmers" needed to do. It would do the job of turning the malt nicely. Has anything been found that might support this idea? There's only one discovery that I know of. During road works in 1987 at Achavanich in Scotland, a female cist burial dated to the Bronze Age was discovered. It had contained the crouched burial of a young woman, however only the skull and a few bones remained.

The grave goods that accompanied this young woman were these: a beaker or food vessel, a thumb nail scraper, two flint flakes and, unusually, the shoulder blade of an ox. The beaker or food vessel had organic residues within it. This is another rare find. According to the official site records (HER)

"The contents of the beaker were analysed by Dr Brian Moffat of SHARP who, from a preliminary examination, suggested that it contained: prepared cereal grain, honey, added flowers and fruit (including meadowsweet, bramble & wood sage), and the sap of birch and alder trees."
 
Similar residues have been found in other bronze age pots and have been identified as the remains of ale. These two things combined, the pot with cereal based residues and an ox shoulder blade, suggest to me that the woman may have been a maker of malt and ale. She had been buried with the necessary equipment. I mentioned this to a couple of people on the tour and they agreed it could be a possibility. The young woman who was buried 3700 years ago is now the subject of a new investigation by archaeologist Dr Maya Hoole. The details are here if you are interested.

ox shoulder blade from the Achavanich burial, was it used to turn the malt?
source here (this is a screen grab from the Facebook page)

The next part of the tour took us to a small room, the laboratory, where the viability of grain for germination was assessed. Why does it need to be tested before it is steeped and turned out on the malting floor? Because barley has a latent dormancy after harvest. It must be stored, in a dry place, for a few weeks or months before it will germinate. The reasons for this and the biochemistry behind it are not yet fully understood. The length of dormancy can vary between crops and barley variety. Traditionally, grain has always been left for a while after harvest. People have known about latent dormancy for a long time.

Grain that will not germinate is useless to a maltster. Upon delivery, samples are taken from every batch of grain. Individual grains are selected at random and tested for viability. This can be done by steeping them in a solution of hydrogen peroxide at 0.75% at 18-21 degrees Centigrade. Germinated corns (seeds) are counted after three days. For a working maltings, this takes too long.

A quicker method of checking viability is to cut a grain longitudinally and use tetrazolium chloride which stains the embryo pink. The maltster can get a result in half an hour. There was a very nice little grain cutting machine in the laboratory at Highland Park, used to cut grains in half for testing from every batch of barley. Shame I forgot my camera, but here's a picture of a stained living barley grain from the MAGB website. Pink toed barley, that's what the maltsters call it, if the barley has a pink toe then it's good for making malt.

white endosperm, pink embryo, it's alive!
source here

The final part of the tour was to climb the old narrow wooden staircase, it was more like a boxed in ladder, to look at the kilning floors in the loft. We were treading in the footsteps of maltsters past, it was a strange feeling. The steps were worn, malt has been dried here, in the same way, for two hundred years. We looked through the window to see the green malt, steaming as it began to dry. It looked very much like the photo below. Drying malt on this scale takes three or four days. The maltsters turn it at regular intervals so that it dries evenly. Hot air and peat smoke from the fire downstairs passes along the flue and through the bed of wet malt, imparting flavour, drying it gently so that the malt is not killed.

green malt at Highland Park, steaming on the kiln floor as it slowly dries
source: a blog by the whiskyspeller's here

We left the kilning floors by a small door which led us onto a metal walkway on the roof, right beside the distinctive pagodas. Whenever the malt is being dried there is steam coming from the pagodas. We had great view over Kirkwall and a new perspective of the Distillery, a place that we often drive past. 

the twin pagodas of the Highland Park Distillery

source here

Finally, we went down the metal staircase on the outside of the building to see the kiln fire downstairs. The maltsters start the fire with coke to warm the kiln, after this, peat from Hobbister is used. The peaty smoke flavours the wet malt. Coke is used at the end to thoroughly dry the malt. Each fire needs to be run slightly differently, depending upon the batch of malt. It's just another of those maltster's skills that can only be learned by experience and practice.

the kiln fire, it's a long way from the malt and there's a metal flue

This kiln has a fierce fire but is situated a long way from the malt. In a pot kiln, you need great heat to fire the pots. The principle with a grain or malt drying kiln is completely different. Hot air and smoke pass along the flue and through the bed of green malt. There are sturdy metal linings to contain the sparks and make it safe. I don't want to go into any more whisky making details. My interest is in making malt for brewing ale and beer. 

Today there are many different kinds of malt being made by maltsters for brewers. It can be confusing for a non brewer. The most crucial is the base malt, the one that is made and dried like this, carefully and slowly to keep the starch converting enzymes alive. These enzymes are needed in the mash tun. Base malt provides all the necessary sugars for fermentation. Other malts, such as crystal malt or chocolate malt have only been made since the mid 18th Century. Just to confuse the issue even further, there is also roasted barley, which is not malted at all and which gives dark beers like Guinness and porter their distinctive black colour and flavour. Hops add bitterness and other flavours, they are also antimicrobial. Unroasted barley alone cannot be used to make beer, it is added to the base malt. Unroasted barley has no enzymes.

Specialist malts provide colour and flavour to the finished ale or beer. They are a modern thing; making roasted malt is not a prehistoric technology. Specialist malts are roasted at high temperatures that kill all the enzymes, therefore it is not possible to make beer using only this kind of malt. I shall have to write something later about this, it's a huge subject. 

Malt is a mysterious thing to most people. In the world of archaeological and anthropological literature I find few references to malt. There is very little meaningful discussion of it.  Assumptions have been made that malt is "toasted roasted barley sprouts". Another belief is that the archaeologist has to actually find "sprouted barley" with roots and shoot still intact for there to have been malting and brewing at their site. I have been told this many times by archaeobotanists. The reality is that the malt loses its' roots and shoots in the kiln. An archaeologist will not find them. There are many other indications that grain has been malted.

When you read the academic archaeological and anthropological literature about "alcohol production in prehistory", there is a belief, an assumption, that all you have to do is mush up a few sweet things, like berries, honey, some sort of sweet plant, maybe a bit of barley and some birch sap. Leave it in a bucket or a pot and, magically, you will have "some sort of alcohol". Making ale and beer is not like that at all. Malt is the essential ingredient. It provides both flavour and, more importantly, the necessary fermentable sugars without which there will be no ale. No beer. 

That's more than enough for now. I shall continue working on my post about alcohol production and some of the myths that surround it in the archaeological and anthropological literature. I look forward to comments and discussion with about malt in the future. Malt matters.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Here's a bit more that I've written about malt, malting, the history and the archaeology. I shall get around to tagging the blogs soon so they are easier to navigate.

Who were the first maltsters? The archaeological evidence for floor malting.

Brewer & Distiller International February 2016
The craft of the maltster  
Food & Drink in Archaeology 4 eds Howard, Bedigan, Jervis & Sykes

first farmers first maltsters

thousands of grain impressions in a burnt plaster floor 
where have all the malting floors gone?

desperately seeking sugars

grain dryers, malt kilns and malting ovens

where have all the malting floors gone?

There are only a handful of malting companies in the British Isles who still use the ancient and traditional technique of floor malting. One of these is Tucker's Maltings, in Newton Abbott, near Exeter, Devon. They are the only Maltings in the UK who offer regular guided tours. Another is the Warminster Malt Company, established in 1855. Guinness owned and operated this Maltings between 1950 and 1994. It provided the malt for the famous brew. When they moved out, the new company provided quality floor malt for several small independent craft breweries.

The Crisp Malting Group is a large company, with malting plants operating in Scotland and England. They own Maltings in Alloa and Portgordon, Scotland, and also in Ditchingham, Great Ryburgh and Mistley in Suffolk, Norfolk and Essex, respectively. The site at Great Ryburgh is the largest and, as they say on their web page, it provides an insight into the technical developments and innovations that have taken place in the malting industry over the last 150 years. The Ryburgh Maltings was set up in the 1850s. It eventually became the largest floor malting plant in Europe. They still have and use some of the traditional floor malting facilities. Today, however, because of demand, most of the malt is produced using modern equipment. These are the Saladin Maltings, installed in the early 1960s. Circular germinating vats, also known as drum maltings, were added in 1973. In the early 1990s, modern computerised systems were introduced.

These modern systems can deal with large amounts of grain but the fundamental processes of steeping, malting and kilning remain unchanged. If you want to see just how huge the modern computerised GKV systems can be, here is a time lapse video of one being built between August 2011 and February 2012 for the Great Western Malting Company. It will replace the drum maltings. In the 21st century, making the equipment for malting has become a big industry in itself. 

raking the malt on the germination floor

There is also Thomas Fawcett & Sons Ltd, based in Castleford, West Yorkshire, where the original malting floors are still in use, alongside the Saladin Maltings and a state of the art germinating kilning vessel. The family has been making malt since the 1760s. Established in 1809, the family business and company has seven generations of experience of making malt.

We contacted them not long after visiting the Corrigall Farm Museum on Orkney where we had seen the traditional 18th century grain barn, complete with threshing and malting floor. Fawcett's were kind enough to take us on a guided tour round the Maltings and explain what they did. That was in 1997, just before I completed my thesis. It gave us an insight into the complexities of malting on an industrial scale. A more recent description of a tour around Fawcett's is here. It seems that not a lot has changed there over the last 17 years.

So, where have all the malting floors gone?
Replaced by modern technology, almost every one ...

It's crucial to turn the malt regularly. This aerates it and prevents the rootlets from becoming entangled and matted on the malting floor. This important job has traditionally been done by people, who pulled a specially designed malt rake through the germinating grain. It is a time consuming process. As the malting floors became larger and larger to cope with the demand for beer and whiskey in the Victorian era, so the task of turning the malt became increasingly labour intensive and expensive.

In the 1890s, a new mechanised system was invented by Charles Saladin, a French engineer (1878-1942). Named after him, the Saladin box was a large concrete or metal box in which revolving metal forks moved slowly from end to end, turning and aerating the grain as it germinated. The picture below is from a Belgian malting company's web pages, Dingemans, who began to use the new mechanical system in the early 20th century. The malt needs to be aerated and, as time went by, the basic design has been improved with perforated floors, and air being blown through the germinating grain to maintain an even temperature. Drum maltings are essentially the same system, but with circular grain beds, not rectangular boxes.

In the British Isles, the malting floors began to be replaced by Saladin box maltings slightly later than in Europe, with the first being installed in Edinburgh's North British Grain Distillery in 1948. They became increasingly popular during the 1950s and 1960s. Saladin boxes and pneumatic maltings, where the germinating grain is aerated, have been improved upon by larger capacity drum maltings and more recently by enormous computer controlled state of the art Germinating Kilning Vessels.

Malting equipment in the modern food processing industry has become huge and complex, yet it is still based upon the fundamental processes of steeping, germination and kilning. There is a very good analysis of modern malting techniques and equipment here, Chapter 3 of ' Engineering Aspects of Cereal and Cereal Based Products' edited by Raquel de Pinho Ferreira Guine, Paula Maria dos Reis Correia.

malthouses
Apart from the Nottingham cave maltings, dated to the 13th and 14th centuries, there are very few recorded malthouses or facilities for making the malt in the medieval era. Mostly, malt was made in the grain barn. The cave maltings are unique. Because of the ambient temperature being the same all year round, they could make malt all the time. In a traditional grain barn or malthouse, it was only made in the cooler months of the year, those months with an 'r' in, that is, any month except May, June, July and August when it was too hot to make malt. Over the centuries, as the breweries gradually became larger and more centralised in towns, so the malthouses and malting floors had to become much larger to supply them.

Great Dunmow Maltings, now a museum

The details of the commercialisation, industrialisation and mechanisation of the malting process in England is very well told by Amber Patrick in her report for English Heritage. She explains that the basic 16th century malthouse had two floors, the top being for grain storage and the ground floor was the growing floor. The kiln for drying the malt would be at one end. A good example is the Boyes Croft, Great Dunmow, Essex, a Grade II listed building.

By the end of the 17th century, commercial malting was on such a scale that it warranted taxation. The Malt Tax was introduced in 1697 and was not repealed until 1880. The malting industry became highly regulated and the buildings became larger, sometimes with two malting floors, one above the other. Amber Patrick explains that the trend for the last three or four hundred years has been for the malthouses to become bigger and bigger.

The Industrial Revolution and the construction of the canals, then the railways, greatly accelerated this trend. It became easier to transport large quantities of malt to the breweries quickly and efficiently. More multi storey Maltings were constructed in the 18th and 19th centuries, usually right by the canal or the railway.

The Bass Maltings, above, were built between 1903 and 1906. There was an engine house, to provide the power for shifting around the huge amounts of malt that was made there. It was originally planned to build eight more malting buildings, mirroring the eight that did get constructed. It was a state of the art, hugely mechanised turn of the century floor Maltings, one of the last to be built in Britain. It closed down in the 1960s, with the introduction of box and pneumatic maltings, which could produce more malt at a cheaper cost.

While browsing about on the internet, I found some fascinating images of the inside of the Maltings, on a blog about decaying industrial buildings, www.adarkertrantor.co.uk. They were taken in 2012 and they show how this important industrial site was abandoned with much of the equipment still there.


Malthouses were huge, multi storeyed and functional, yet they could still be attractive buildings. As I was writing this blog, I looked on the internet for a suitable image of a disused Maltings that I could use. The difficulty in finding an image online of an industrial malthouse is that most of them have been closed down or demolished in the last few decades. Many have been converted into flats and housing developments. Some have become offices and others are Listed Buildings. I came across this recent story from the Newark Advertiser, about a Grecian style Maltings that is up for sale and future development. It is a good story, well worth reading, since it tells you who owned it and how it came to be built. The Maltings was built in 1864 and it was last used to make malt in 1966. It could be the story of any industrial maltings.

Making malt in the the ancient and traditional way is being revived in the USA. That's great news - I know about a few people who are doing this. If you are making malt on a small scale, using traditional techniques and I have missed you out, please let me know.

 Valley Malt, Hadley, Massachusetts

 Riverbend Malthouse, North Carolina

Rebel Malting Company - they use a Saladin system

Colorado Malting Company

further reading

Amber Patrick Maltings in England a report for English Heritage, 2004

Christine Clarke, The British Malting Industry since 1830 published in 1998
Summary: "Malt is the main ingredient in the national beverage, beer. For centuries the malting industry has provided a principal bridge between agriculture and the brewing industry, yet its history has been little studied. The British Malting Industry since 1830 is the first overall account of malting, dealing with the processes, products and sales, owners and employees, and with the evolution of what in 1830 were almost all small, local businesses. Christine Clark traces the influence of the growing demand for beer in Victorian England, and of the increasing power of the large breweries, on the malt industry ..."

Roger Putman, Beers and Breweries of Britain (pages 9-12),published 2004